New England Die Cutting ISO certification- ISO 9001:2000

	Home
	About NEDC
	Production Capabilities
		Die Cutting
		Waterjet Cutting
		Laser Cutting
		CNC Drilling / Routing
	Materials
		EMI / RFI Materials
		Thermal Materials
	Brochures / Literature
	Quality / Certifications
	Engineering Support
	RFQ
	Contact Us
	News Releases
	Site Map

THERMAL MATERIAL DATA SHEETS

Ja-Bar Data Sheets
- Series 700 - Thermally Conductive Insulators Specs
Parker Chomerics Data Sheets
- Thermflow Phase-Change Interface Pads Specs

Thermagon Data Sheets

T-gon 200 Series Specs
T-pli 200 Series Specs

Ja-Bar

Series 700 - Thermally Conductive Insulators

	701	702	703	704	705	706	707	708	709	700 ctcs
Color	Gray	Pink	Green	White	Grey	Beige	Yellow	Mauve	Yellow	Pink
Thickness Inches	0.010	0.010	0.015	0.015	0.006	0.006	0.009	0.006	0.006	0.020/0.188
Filler	AL	Boron Nitride	Alumina/Boron Nitride	Boron Nitride	Alumina	Boron Nitride	ALumina	Alumina	Boron Nitride	Alumina
Hardness Shore A	85	8.5	80	80	90	90	90	90	90	-
Breakdown Voltage(AC Volts)	4500	4500	4000	4000	6000	6000	2500	6000	6000	6000
Thermal Conductivity(W/m-k)	0.9	1.2	2.0	3.5	0.9	1.3	1.2	0.9	1.3	-
Thermal Resistance(°C/watt)	0.50	0.30	0.23	0.20	0.40	0.20	0.30	0.30	0.20	0.20
Dielectric Constant (1000 Hz)	5.5	4.5	4.0	4.0	5.0	3.7	4.5	5.0	3.7	5.5
Breaking Strength (# / in)	100	100	65	65	30	30	100	30	30	-
Tensile Strength(KPSI)	11.1	11.1	6.5	4.3	5.0	5.0	14.1	5.0	5.0	-
Elongation Percent	4	4	4	4	40	40	4	40	40	-
Specific Gravity	2.1	1.5	-	1.5	-	-	1.5	-	-	2.0
Outgassing % TML	0.40	.22	-	0.26	0.28	0.36	-	-	-	-
24 hr PC	0.25	-	-	0.07	-	-	-	-	-	-
% CVLM	0.11	0.08	-	0.10	0.07	0.09	-	-	-	-
24 hr PC	0.07	-	-	0.03	-	-	-	-	-	-
Continuous Use Temp (C)	-60/+180	-60 to +200	-60 to +200	-60 to +200	-60 to +200	-60 to +200	-20 to +150	-20 to +150	-20 to +150	-60 to +200

Parker Chomerics

Thermflow Phase-Change Interface Pads

	T725	T443	T310	T710	Test Method
Carrier	None	Fiberglass	Fiberglass	Fiberglass	-
Color	Pink	Light Grey	Light Grey	Light Grey	Visual
Thickness	0.0005 (0.13)	0.005 (0.13)	0.007 (0.13)	0.005 (0.13)	ASTM D374
Dry Pad	Standard	Standard	Standard	Available	-
PSA on one side	Available	Available	Available	Standard	-
Thermal Impedence	0.03@50 psi (no PSA)	0.10 @50 psi (no PSA)	0.17 @300 psi (no PSA)	0.10 @ 5 psi (no PSA), 0.18 @ 5 psi (PSA)	ASTM D5470 (modified)
Apparent Thermal Conductivity	0.7	1.0	0.6	0.7	ASTM D5470 (modified)
Phase-Change Temperature	58 C	43	46	45	ASTM D3418
Operating Temperature Range, C	-60 to +125 C	-60 to +125	-60 to +125	-60 to +125	-
Volume resistivity ohm-cm	10E15	5E15	5E14	5E16	ASTM D257
Specific Gravity	1.11	1.27	1.63	1.15	ASTM D792
Suggested Heat Sink/Component	5 to 100 (0.035 to 0.690)	20 to 60 (0.035 to 0.690)	50 to 300 (0.345 to 2.070)	5 to 20 (0.035 to 0.138)	-

Thermagon

T-gon 200 Series

	T-gon 210
Construction and composition	Reinforced boron nitride filled silicone elastomer
Color	White
Thickness	0.010"(0.25mm)
Thickness Tolerance	+/- .002"(+/-0.05mm)
Density	1.52g/cc
Hardness	85 Shore A
Tensile Strength	N/A
% Elongation	N/A
Outgassing TML (post cured)	0.06%
Outgassing CVCM (post cured)	0.05%
UL Flammability Rating	94 VO
Temperature Range	-60°C to 200°C
Thermal Conductivity	5 W/mK
Thermal Impedance @ 100 psi	0.18 °C-in²/W
Thermal Impedance @138 KPa	1.17 °C-in²/W
Breakdown Voltage	6000 Volts AC
Volume Resistivity	5 x 10e13 ohm-cm
Dielectric Constant @1MHz	3.32

T-pli 200 Series

	T-pli 210	T-pli 220	T-pli 240	T-pli 260	T-pli 2100	Test Method
Construction and Composition	Reinforced boron nitride filled silicone elastomer	Boron nitride filled silicone elastomer	Boron Nitride filled silicone elastomer	Boron Nitride filled silicone elastomer	Boron Nitride filled silicone elastomer	-
Color	Rose	Blue	Yellow	Grey	Grey	Visual
Thickness	0.010 inch (0.25mm)	0.020 in. (0.51mm)	0.040 in. (1.02mm)	0.060 in (1.52mm)	0.100 in (2.54mm)	-
Thickness Tolerance	+/- 0.001 (+/- 0.025mm)	+/- 0.002 in. (+/-0.05mm)	+/- 0.002 in. (+/-0.05mm)	+/- 0.003 (+/- 0.08mm)	+/- 0.005 in (+/- 0.13mm)	-
Density	1.44 g/cc	1.43 g/cc	1.43g/cc	1.38 g/cc	1.36 g/cc	Helium pycnometer
Hardness	75 Shore 00	70 Shore 00	70 Shore 00	70 Shore 00	70 Shore 00	ASTM D2240
Tensile Strength	N/A	35 psi	35 psi	20 psi	15 psi	ASTM D412
% Elongation	N/A	5	5	5	5	ASTM D412
Outgassing TML(Post Cured)	0.08%	0.07%	0.07%	0.10%	0.15%	ASTM E595
Outgassing CVCM(Post Cured)	0.03%	0.02%	0.02%	0.04%	0.07%	ASTM E595
UL Flammability Rating	94 HB	94 HB	94 HB	94 HB	94 HB	E180840
Temperature Range	-45 C to 200 C	-45 C to 200 C	-45°C to 200 °C	-45 °C to 200°C	-45°C to 200°C	-
Thermal Conductivity	6 W/mK	6 W/mK	6 W/mK	6W/mK	6 W/mK	ASTM D5470 (modified)
Thermal Impedance @ 20psi	0.16 C-in sq/W	0.21 C-in sq/W	0.37 °C-in sq/W	0.49 °C-in sq/W	0.84°C-in sq/W	ASTM D5470 (modified)
Thermal Impedance @ 138KPa	1.03 C cm sq/W	1.35 C-cm sq/W	2.45 °C-cm sq/W	3.35°C-cm sq/W	5.81°C-cm sq/W	ASTM D5470 (modified)
Thermal Expansion	51 PPM	123 ppm/C	72 ppm/C	72 ppm/C	96 ppm/C	IPC-TM-650 2.4.24
Breakdown Voltage	1000 volts AC	4000 volts AC	>5000 Volts AC	>5000 Volts AC	>5000 Volts AC	ASTM D149
Volume Resistivity	5E13 ohm-cm	5E13	5E13	5E13 ohm-cm	5E13 ohm-cm	ASTM D257
Dielectric Constant @ 1MHz	3.21	3.21	3.26	3.26	3.40	ASTM D150